I have tried Kiwi Syslog and it isn’t working.
Here's the situation:
I have a virtualized Avaya PABX solution.
The server is on a virtual machine.
There is a virtual PC (Windows 7) for management.
They are on the same host and network.
All firewalls are off.
Kiwi Syslog is installed on the virtual PC. Configured to list on both UDP and TCP on port 514. I have tried all manner of Data encoding. I am not using a "bind to" address. But I have tried it.
Avaya logs show it sending the SMDR output to the PC's IP address on port 514.
75338830mS CDR: SMDR OUTPUT '2016/06/14 10:47:59,00:00:05,15,XXX320400@XXX.XXX.253.232,I,7002,94140858,,0,1000037,0,T9009,Line 9.1,V9500,VM Channel 0,0,0,,,,,,,,,,,,,,10.10.10.160,1270,10.10.10.160,1273'
75338830mS CDR: Using TCP to send data len 174 to 10.10.10.165 on port 514
Putty and Wireshark show it hitting the PC on port 514.
Kiwi Syslog doesn’t show it in the display or save it into the configured destination.
I have tried the free version of Kiwi Syslog (9.5.1) and an evaluation version (9.5.1). Neither receives anything. I have seen other people post a similar problem and they resolved it by using an older version.
Any suggestions?