Above is my setup: The info are been logged to file twice, both in the Test and Default locations.
The same setting are
under Test1-3
Filter: Filter the desire IP ex: 192.168.1.1 Exclude Range “blank”
Action 1: Display the IP (Display 3)
Action 2: Log IP to file (c:\.....)
Action 3: Stop processing message
Then comes the Default
settings:
Filter: Include Ranges is “blank” Exclude Range: 192.168.1.1
Action 1: Display the IPs (Display 0)
Action 2: Log all IPs to file (c:\....)