Clik here to view.
Help with kiwi snmp trap
Hi I testing kiwi and its look like its not translate the traps OID to text like in NPM trap viewer 10-21-201414:10:00Local7.Debug10.50.94.204community=LAB, enterprise=1.3.6.1.6.3.1.1.5.4,...
View ArticleRe: Help with kiwi snmp trap
You my need to have the MIBs added to Kiwi Syslog for your device.
View ArticleRe: Help with kiwi snmp trap
That's a Cisco link up/down message and should be part of the standard MIB database but it's been a long time since I checked. In the Kiwi config do you have 'Perform MIB lookups' enabled? This is in...
View ArticleClik here to view.
Re: Help with kiwi snmp trap
Mmm..I did download the last DB from kiwi syslog and download the Juniper and APC Mibs and now it'sKiwiSyslog\Syslogd\MIBs run the EXEstop/start the server. "problems"I need to forward traps from...
View Articlekiwi syslog service crashes
I successfully installed Kiwi Syslog server (latest version) and successfully received 18.8 million logs in 5 – 6 hours and after that the application crashes and every time I re-start the service it...
View ArticleClik here to view.
Re: kiwi syslog service crashes
The Kiwi syslog engine rated for approximately 2 million messages per hour. Your ingestion rate is a bit over that... The max messages per hour is also impacted by the number of rules, filters, and...
View ArticleRe: kiwi syslog service crashes
Also I would recommend looking into the priority of messages. For example, do you need informational syslog messages (Which can be up to 90% +)?
View ArticleRe: Help with kiwi snmp trap
THanks one q more.snmp trap forwarding to the next server the trap like it is with the same source ....right?its not working for me i see kiwi as the source sender.....
View ArticleCan Kiwi forward SNMP trap forwarding snmp trap and keep the source ip (spoof)
Hi I testing Kiwi as snmp trap server that will forward some Traps to NPM.I find it hard to forward SNMP trap and keep the source ip.Is that syslog Only to "sppof" the source? RouterA->Trap...
View ArticleClik here to view.
Re: Can Kiwi forward SNMP trap forwarding snmp trap and keep the source ip...
Ohh Found it thread from 2010 SNMP forwarding any one know other standalone that can do that.?
View ArticleKiwi Syslog Web Access Accounts
I understand I can create a maximum of five user accounts for web access. Does this limitation apply to the number of accounts that can access the web interface through AD, too? I have AD...
View ArticleClik here to view.
Re: SNMP forwarding
Hi Kiwi Kuz Is that feature on cards?I like to set Kiwi server as SNMP TRAP "barrier" or "first line of defence" to NPM.That featrue will make Kiwi very very handy.Any news?
View ArticleRe: Kiwi Syslog Server Setup Window is Blank
Did you ever resolve this issue? I'm experiencing the same thing.
View ArticleRe: Kiwi Syslog Server Setup Window is Blank
Please post a screenshot of what you are seeing.
View ArticleRe: Kiwi Syslog Server Setup Window is Blank
The screenshot above from brandonvdv is exactly what I’m seeing. There is no default rules in setup and nothing is ever displayed in the grey area between the buttons at the top and check box at the...
View ArticleRe: Kiwi Syslog Server Setup Window is Blank
Looking at the screenshoot I see the MPH is at ~1.5mm. If you have any rules running at all you are pretty close to the realistic limit of the syslog server. This could be a resource issue.
View ArticleRe: Kiwi Syslog Server Setup Window is Blank
The screenshot shows 1600 MPH (Messages Per Hour) which is 26 messages per minute or about .4 messages per second. I'm sure the server can handle much more than that. Also, I don't have any rules setup...
View ArticleRe: Kiwi Syslog Server Setup Window is Blank
I completely misread that! Can you export the config from the File menu? Or, run Create tech support file?
View ArticleClik here to view.
Re: Kiwi Syslog Server Setup Window is Blank
Yes. The export is pasted below. I was wondering if this could be .NET issue. It would make sense if .NET is used to display the rules (although I went into Features and added .NET support). During...
View Article