Re: About Kiwi Syslog, displayed host IP.. does it has to be in the same...
Lutfi, If you get a packet capture, what is the source address of the packet?
View ArticleClik here to view.
Re: unable to bind snmp listner to any adaptor on specified port 162
From the command line type the following: netstat -aon | findstr ":162" This will let you know is anything is bound to port 162
View ArticleForwarding the EventID from WinServer to Syslog -> SQLDB
Hi there,intentionally we have a very simple Setup: We're forwarding certain logfiles from our windows Servers to kiwi syslog Server by free solarwinds forwarding tool. In a second step we're pushing...
View ArticleClik here to view.
Re: About Kiwi Syslog, displayed host IP.. does it has to be in the same...
Hi Bkyle, here is the screenshot of my syslog : server address : 10.111.0.21/24gateway address : 10.111.0.1 device 1 source address : 10.110.5.205/26device 2 source address :...
View ArticleRe: unable to bind snmp listner to any adaptor on specified port 162
Nothing is bound to port 162. Windows SNMP TRAP was listening same port. I have disabled the services. But still Kiwi syslog cannot listen SNMP port 162.
View ArticleRe: unable to bind snmp listner to any adaptor on specified port 162
Nothing is bound to port 162. Windows SNMP TRAP was listening same port. I have disabled the services. But still Kiwi syslog cannot listen SNMP port 162.
View ArticleClik here to view.
Re: About Kiwi Syslog, displayed host IP.. does it has to be in the same...
Which IP address do you see in a Wireshark capture? That is the address that we will display.
View ArticleRe: unable to bind snmp listner to any adaptor on specified port 162
Did you restart Kiwi syslog? That's likely needed so it can bind to the open port.
View ArticleClik here to view.
Re: Forwarding the EventID from WinServer to Syslog -> SQLDB
I'm not sure what exactly you're trying to do. You wrote that you want to filter by certain event IDs and then send them to a separate db-row. Did you mean a separate table? Each syslog received...
View ArticleRe: Forwarding the EventID from WinServer to Syslog -> SQLDB
Hi kstone,thanks for your answer. Not in a separate table, only in a separate column.. I just want an additional field "EventID" in the table, and split up the MsgText, or just copy the EventID from...
View ArticleClik here to view.
Re: Forwarding the EventID from WinServer to Syslog -> SQLDB
To add the event ID to a script will need to be used. Kiwi Syslog can handle, according to the docs, about 2 million messages per hour. That works out to about 550 per second. We average about 600k...
View ArticleClik here to view.
Re: Forward syslog events to QRadar
Hi Bobteal, I need to configure a profile into Kiwi syslog server, so that network devices logs can be forwarded for Analysis (SIEM) . Kindly suggest how can i take forward.
View ArticleClik here to view.
SolarWinds Event Log Fowarder(1.2.0.114) TCP Issue
SolarWinds Event Log Fowarder(1.2.0.114) TCP Issue After Kiwi Syslog Server's service re-started, the reconnection problem had occurred on SolarWinds Event Log Fowarder(1.2.0.114) TCP protcol. To...
View ArticleKIWI Syslog server: SSL feature evaluation in 'Syslog evaluation version...
I have KIWI Syslog evaluation version(Kiwi_Syslog_Server_9.5.1.Eval.setup). I have enabled SSL on Syslog server following all the steps as mentioned in syslog help ) . But on KIWI Syslog Server...
View ArticleClik here to view.
Re: KIWI Syslog server: SSL feature evaluation in 'Syslog evaluation version...
Amit, What does Help\About show?
View ArticleClik here to view.
Re: KIWI Syslog server: SSL feature evaluation in 'Syslog evaluation version...
Hi, Help was "How to enable SSL for Webaccess". My query is how to use the "Secure TCP" functionality highlighted in yellow in attached image in KIWI syslog server evaluation version 9.5. But under FAQ...
View ArticleRe: KIWI Syslog server: SSL feature evaluation in 'Syslog evaluation version...
Thanks for the screenshot. If you look at the top, it says (Free Version 9.5). This is why you are getting the "licensed version" message. How long has this evaluation been installed?
View ArticleClik here to view.
Re: KIWI Syslog server: SSL feature evaluation in 'Syslog evaluation version...
Hi, Evaluation version installed only for 1-2 days. I understand its pointing towards licence version for this feature.But under FAQ on KIWI syslog server its mentioned ---- "Yes, the trial version of...
View ArticleCan I install Kiwi 9.3.4 in Windows Server 2012 R2
I currently have a Kiwi Syslog (9.3.4) on a Windows Server 2003 R2 (x64) and would like to know the following; 1. Can I install the current version (9.3.4) into a newly build Windows Server 2012 R2...
View ArticleRe: Can I install Kiwi 9.3.4 in Windows Server 2012 R2
1. Support for 2012 R2 was not added until version 9.4.2. 2. As long as your maintenance is current you can install the latest version. If you are not current Kiwi Syslog will go into free mode. See...
View Article