added... so far no difference....I am adding the same on a Cisco ASA on another system on another network...Will update if it works there...
testbed2600#
testbed2600#config t
Enter configuration commands, one per line. End with CNTL/Z.
testbed2600(config)#login on-failure log
Enter TEXT message. End with the character 'l'.
bad password l
Translating "on-failure"...domain server (255.255.255.255) [OK]
testbed2600(config)#
testbed2600(config)#^Z
.................
!
logging trap debugging
logging source-interface Ethernet0/0
logging 172.16.7.57
login-string on-failure ^Cog
bad password ^C
!
line con 0
transport input none
line aux 0
testbed2600#
testbed2600#
testbed2600#wr t